Getting a new perspective, watercolor on paper mounted on board, 30 x 30 inches
Click on image to buy Print or Original Painting.
This is a watercolor on paper mounted on board. Until now I have been using a layering technique with watercolors mostly for portraits because I find this is a great way to convey the subtle tones of skin and to avoid hard edges. For this subject I wanted to try that technique to paint the clouds and the sea.
I did mount the watercolor paper with my drawing on board before I start painting. If you are interested in that technique you can read the post here: Mounting Watercolor paper on board
When layering watercolors I am always starting with the yellow layer as I am going to be using Yellow Ocher and this is the least transparent of all the colors I will use.
I start painting only with yellow ocher watercolor. I am wetting the paper with plain water before I start painting the sky, so I am sure all the edges will stay soft. I am also creating some white areas by removing paint with a tissue paper
For the blue layer I want to use two tones of blue, a warmer ultramarine blue and a colder Cobalt Turquoise blue
Once the yellow layer is completely dry I start adding a layer of Ultramarine blue to the sea.When dry I start painting the boats and add details to the sea.
Before painting the clouds, I protect the boats I just painted with masking fluid so I can paint with large gesture and not have the dark blue on the boats bleed into the sky
I am also using masking tape to keep a clean edge between the sea and sky.
I am then wetting the sky area with plain water before painting the clouds, I am using ultramarine on the top part and cobalt on the lower part.
For the red layer I am going to use Alazarin crimson watercolor.
I then add a very light layer of red on the sky and sea areas,I am also adding some red to the boats
The last step I am taking is scrubbing off a bit of color with a stiff brush and lots of water, then adding a bit more white with a fine layer of gouache.
Here is a time lapse video that will show you the whole process in about 4 minutes
You might also like: